background image

Deskmaster

Deskmaster

DIALING WITH COMFOR

T

Last Number Redial

You can automatically redial the last manually dialed number, e.g. because the called sub-
scriber was busy or did not answer the call. 

Handset offhook or
hands free key pressed.

Press redial key.

Note:

Last number redial is also possible during preparatory dialing.

Memory numbers are not stored to the redial register and thus cannot be redi -
aled using the last number redial feature.

Extended Last Number Redial

The last 10 manually dialed phone numbers are stored in a redial list. With the phone in
idle state, this list may be stepped through by subsequent depressions of the redial key.
The entry displayed will be dialed when the handset goes off hook or the hands free key
is pressed.

Repeatedly press redial key 
until the desired entry is
displayed.

Lift handset or 
press hands free key.

11

10

P le a se   di al _

0 1 2 3 4 5 6 7 8 9 _

0 7 1 1 8 3 9 8 2 6 1 _
r i n g i n g

0 7 1 1 8 3 9 8 2 6 1
r i n g i n g

Dialing from the Phone Book

The phone includes a phone book with up to 100 entries. Each entry consists of a name
(up to 20 characters) and a phone number. The phone number may contain subaddress and
the information for a closed user group.

Phone in idle state.

RIGHT arrow to go to the menu.
(Function code “290” will be 
displayed optionally.)

Select telephone book,
1st entry will be displayed.

OR press the phone book key.

SCROLLING:
With each keystroke on the
arrow keys, you can scroll 
the entries.

SEARCHING:
If a character is entered, the first entry starting with that character will be
selected from the phone book and the cursor moves a step to the right.
Entering the following characters, the search becomes more and more pre-
cise.
Pressing the RIGHT arrow key will display the next entry and switch off the
search function.
Entry of characters will be through the dialing keypad. A single character
assigned to a key will be selected by subsequent depression of the key with
short intervals.

(See also “Programming the phone book”. )

CHANGES:
If the LEFT arrow key is pressed during search mode, the last entered char-
acter will be deleted (UNDO). 

OK

A – Z

We d  0 1 .  J an   9 7   0: 3 9
TO P C O M

29 0   te le pho n e  bo o k

A _ C O M PA N Y
0 7 2 3 1 9 8 7 6 5

TO P C O M
0 7 2 3 1 3 9 6 4 1 0

Summary of Contents for DESKMASTER 510i







































Reviews: