Deskmaster
Deskmaster
Modifying Passwor
d
Select the passwor d menu.
Enter old password.
The “*” character will be
displayed instead of the digits
entered. In case of a wrong
password, an error message will be displayed.
Enter new password.
Use the LEFT arrow key to
delete the digits and enter new
ones from the dialing keypad.
The new password will be stored.
The default password is “0000”.
IMPORTANT NOTE:
REMEMBER YOUR PASSWORD !
45
44
p a s sw o rd
1 92 mod if y
Pa s sw o rd:
* * * *
_
m od i fy p a ssw o rd
p a s sw o rd : 0 0 0 0_
OK
OK
PROGRAMMING MULTIPLE SUBSCRIBER NUMBERS (MSN)
By programming an MSN number, each phone of the ISDN bus can be directly addressed
upon an incoming call. This of course requires that this “dial-in” number is known to the
caller.
If no MSN has been programmed, the ISDN phone will accept all calls to the ISDN bus. With
MSN’s programmed, the phone will only react to calls received with one of the MSNs pro-
grammed.
The Deskmaster 510i supports 3 MSNs for voice calls and a fourth one for data calls.
The Deskmaster 520i has an additional MSN number for the analog port.
To the MSNs for voice calls a personalised ringing tone can be assigned.
Consult your network provider for more MSN numbers on you ISDN line.
MSN for Voice Calls
Go to the system parameter
menu.
Go to the MSN menu.
The menu can be accessed directly
using the shortcut
259.
The first MSN will be displayed.
With the LEFT arrow key(
),
an existing entry can be deleted.
Display MSN 2.
Enter a new MSN.
New or modified MSN will be stored.
OK
OK
OK
OK
OK
25 0 sy s te m pa ra m .
sys t e m pa ra m
25 3 c ha rg e
25 9 MS N
MS N : 1 ( voi c e )
1 0 _
MSN : 2 ( voi c e )
1 1 _
