16
Topcom Butler E2100 TWIN/TRIPLE
Topcom Butler E2100 TWIN/TRIPLE
8.3.2 Manual selection
If you set handset to manual selection, the handset will only choose the handset you have
set:
Press menu button
OK
.
Æ
Use the up
or down
button to scroll to ‘
HANDSET
’ and
press
OK
.
Æ
Use the up
or down
button to scroll to ‘
SELECT BASE
’ and press
OK
.
Æ
Use the up
or down
button to select ‘
Manual
’ and press
OK
.
Æ
Use the up
or down
button to select base 1-4 and press
OK
.
8.4
Call transfer and conference call during an external call
During an external call, press the
-button followed by the number (1-5) of the other
handset.
Æ
The other handset will start to ring:
–
When the other handset takes the line you can talk internally.
If you hang up, the external line will be connected with the other handset.
If you press and hold the
-button for 3 seconds you can talk with the 2nd
handset and external line at the same time (conference call)
–
Or press the
-button again to return to the external call.
Æ
Press the on-hook button
to end the call.
8.5
Internal call (intercom)
•
In standby press the
-button followed by the number (1-5) of the other handset.
•
The other handset will start to ring. You can stop the ringing by pressing the on-hook
button .
•
If the other handset answers the call by pressing the off-hook button
you can talk
internally.
•
Press the on-hook button
to end the call.
9
Reset of the handset
This will undo all changes and set back all default settings (ringer volume, ringer melody,
etc...).
Press menu button
OK
.
Æ
Use the up
or down
button to scroll to ‘
HANDSET
’ and
press
OK
.
Æ
Use the up
or down
button to scroll to ‘
RESET
’ and press
OK
.
Æ
Press
OK
again to confirm.
Æ
Enter the pin code (0000) and press
OK
.
Æ
The unit will
go back to standby.
Default handset settings are:
Handset volume
3
Handset melody
8
Flash time
Short
Dial mode
Tone
Ringer On/Off
On
Auto Talk
Off
These functions only work when more than one handset (like a Twin/Triple/
Quattro version) is registered to the base!
