Topcom Butler E2100 TWIN/TRIPLE
15
Topcom Butler E2100 TWIN/TRIPLE
ENGLISH
8
Register/de-register a handset
8.1
Register to a Butler E2100 base
You can subscribe 5 handsets to one base unit. Each handset can register to 4 base stations
and the user can select which base he wants to use. By default, each handset is subscribed
on the base unit upon delivery (base unit 1).
The below procedure is only applicable to a Butler E2100 handset and base unit!
Remove the base power by unplugging the power cable at the back. Power up the base again
by plugging the power cable back in. The base will be in registration mode for 1 minute.
During this minute, you must do the following to subscribe the handset:
Press menu button
OK
.
Æ
Use the up
or down
button to scroll to ‘
REGISTER
’ and
press
OK
.
Æ
Select the number of the base unit you would like to subscribe the handset
to (1-4) using the up
or down
button.
Æ
Press the menu/OK button
OK
to confirm
Æ
Enter the base pin code (0000) and press
OK
.
Æ
The unit will start searching for the base.
Æ
If the pin is wrong, the handset will mention it and will stop the registering procedure.
Æ
When the handset is registered, it will show ‘
HANDSET
’ followed by the handset number.
8.2
Removing a handset
You can remove a handset from a base to allow another handset to be registered:
Press menu button
OK
.
Æ
Use the down
button to scroll to ‘
DE-REGISTER
’ and press
OK
.
Æ
Enter the pin code (0000) and press
OK
.
Æ
Enter the handset number (1-5) you
want to remove and press
OK
.
Æ
The unit will go back to the previous menu if the removal
is successfully.
8.3
Selecting a base unit
If your handset is subscribed to several base unit stations (max. 4), you must select a base
unit because the handset can only communicate with one base unit at a time. There are two
possibilities:
8.3.1 Automatic selection
If you set handset to automatic selection, the handset will automatically choose the closest
base unit in standby:
Press menu button
OK
.
Æ
Use the up
or down
button to scroll to ‘
HANDSET
’ and
press
OK
.
Æ
Use the up
or down
button to scroll to ‘
SELECT BASE
’ and press
OK
.
Æ
Use the up
or down
button to select ‘
AUTO
’ and press
OK
.
You only need to subscribe the handset if:
•
The handset subscription has been removed from the base unit (e.g. for
reinitialisation).
•
If you want to subscribe a different handset to this base unit.
You can only remove existing handsets and others than the one you are
using.
