- 2 -
•
CAUTION: When transferring product from extreme temperature environments, (e.g. cold truck to warm
humid ballroom) condensation may form on the internal electronics of the product. To avoid causing a
failure, allow product to fully acclimate to the surrounding environment before connecting it to power.
•
Do not mount the product on a flammable surface (linoleum, carpet, wood, paper, carton, plastic, etc.).
•
Do not use in a confined space. Always install the product in a location with adequate ventilation, at least
20 in (50 cm) from adjacent surfaces.
•
Be sure that no ventilation slots on the product’s housing are blocked or clogged by dust. If necessary,
remove the dust.
1.5.3
Power and Wiring
•
Always make sure that the voltage of the outlet to which you are connecting the product is within the
range stated on the decal or rear panel of the product.
•
Make sure the power cord is not crimped or damaged.
•
Never connect this product to a dimmer pack or rheostat.
•
Never disconnect the product from power cord by pulling or tugging on the cord.
•
To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely
disconnect the product from power via breaker or by unplugging it
1.5.4
Operation
•
Do not operate this product if you see damage to the housing or cables. Have the damaged parts
replaced by an authorized technician at once.
•
Do not use the product as a space heater.
•
The maximum ambient temperature (Ta) is 104 °F (40 °C). Do not operate the product at higher
temperatures.
•
Do not cover the ventilation slots when operating to avoid internal overheating.
•
Do not cover or plug the output nozzle during operation.
•
Wipe up spitted fluid immediately. Moisture – also fluid – can destroy the electric.
•
Never carry the product by the power cord or any moving part. Always use the handles of the machine.
•
Drain the tank before transporting the product. Bubble fluid or the fog fluid tanks shall be used for
the relevant fluid only.
•
Always disconnect the product from the power source before cleaning.
•
In the event of a serious operating problem, stop using the product immediately.
•
This product contains no user-serviceable parts. Any reference to servicing in this User Manual will only
apply to properly trained, certified technicians. Do not open the housing or attempt any repairs which
can lead to damage or malfunction.
•
Use only DJPOWER Consumable. Bubble fluid PRO-P and fog fluid PRO-C are recommended.
Keep this User Manual for future use. If you sell the product, be sure that the purchaser receives
this document.
