19
Design Led
– Solutions Driven
42”
multimedia Full HD
TOPAZ™ Wall Mounted
Touch Screens
Hardware User
Manual
4.2
My display goes into standby mode
4.2.1
Power saving function
If your screen is powered ON without being connected to a PC via a visual signal (e.g. VGA, HDMI etc.)
it will automatically go into standby mode within a few minutes. If your screen is not being supplied with
a video signal it will go to standby to ensure that video signal connection is connected properly. Also
you must ensure that the touch screen is accessing the correct input. To do this you must press
“SOURCE” and then navigate to the input source that corresponds with the one you are using and
select by pressing “PLAY”.
PC-RGB
HDMI
DMP
