14
Design Led
– Solutions Driven
42”
multimedia Full HD
TOPAZ™ Wall Mounted
Touch Screens
Hardware User
Manual
3.2
Connecting to PC
The touch screen must be connected to the PC in two ways: visually and interactively. The
recommended visual connection is via the VGA Cable meaning that the display acts like a monitor for
the PC. The touch function is achieved by linking the Infrared touch sensors around the screen to the
PC via the USB Cable (included).
Figure 5 Screen to PC Connections
Connect the screen to the PC via the VGA cable and USB Cable (as shown above). Once these
connections have been made and the PC powered ON take the power lead and insert it into the screen
and connect to mains outlet. The unit will power ON automatically. Before taking any more steps
ensure that the screen is sourcing its display from the PC. This is done by first pressing “MODE” and
then scrolling down to the desired input source (PC) and select by pressing “
→
”.
PC-RGB
HDMI
DMP
IMPORTANT: If the touch screen is the only monitor connected to your PC NO NOT take
the following step. Only proceed with the following if you are using a laptop or another
monitor is connected to your PC.
