6
SPOTLIGHT LED 20W / 1600 LUMENS
ON TRIPOD
EN
Translation of the original instructions
240V AC Charger
Foldable design
OPERATION
Charging
Before initial use, please charge the rechargeable battery for the Rechargeable LED Tube Work Light fully, this typical
-
ly takes 3-4 hours.
1. Connect the charging cable to the LED Worklight charging socket.
2. Connect the charging unit to the 240 V mains supply.
3. When charging the LED Worklight and the battery has low or partial charge, the charge indicator light will illumi
-
nate Red. When fully charged, the same indicator light will turn green.
Overcharge and over discharge protection.
This Worklight is fitted with a safety protection device that protects against over charging or discharging, this will
extend the life of the battery.
Note: Always recharge the Worklight after use to extend the life of the battery.
SWITCHING THE RECHARGEABLE LED TUBE WORK LIGHT
Never use a damaged product.
By controlled repeated pressing of the ON/OFF switch, the Worklight can be set to perform the following functions in
order: Tube Light, Torch Light, Torch side Light, All 3 mode lights,Off.
HOW TO LOCK THE TUBE WORK LIGHT
1. Rotate the part C, and when the lock icon in the left arrow,
the product is in the locked state. As Fig1.
2. When the unlock icon in the right arrow, the product is in
the unlocked state and you can pull the tube light out (as
Fig2), then lock again.
Fig.1
Fig.2
C
