Page
36
of
51
COMMUNICATION SETUP
Protocol VISCA
V_Address
1
V-AddrFix
Off
Net Mode
Serial
Baudrate
9600
Select Item
Change Value
[Menu] Back
RESTORE DEFAULT
Restore?
No
Change Value
[Home] OK
Lens:
Optional items: Type1, Type2
Auto Inspect:
Based on preset position: Off, On
Residence Time:
Auto Inspect Residence Time:1-60
Call Preset Speed:
Auto Inspect Call Preset Speed:1-24
SDI 3G Mode:
3G-SDI signal mode: LEVEL A,
LEVEL B
8.
COMMUNICATION SETUP
Move the main menu cursor to
[INFORMATION], and press the [HOME] key to enter the
communication setup page, as shown in the following figure.
Protocol:
Control protocol type, optional items: Auto,
VISCA, PELCO-D, PELCO-P.
V_Address:
Camera VISCA address: optional items: 1 ~
7
V-AddrFix:
Fixed VISCA address: optional items: Off,
On
Net Mode:
Optional items: Serial, Paral
Baudrate:
Optional items: 2400, 4800, 9600, 38400
P_D_Address: Pelco-D Address, optional items: 0 - 254
P_P_Address: Pelco-P Address, optional items: 0 - 31
9.
RESTORE DEFAULT
Move the main menu cursor to [RESTORE DEFAULT], and
press the [HOME] key to enter the restore default page, as
shown in the following figure.
Restore?:
Confirm restore factory settings, optional items:
Yes, No.
P/T Limit Reset:
Confirm P/T Limit Reset, optional items:
Yes, No.
Note: Press [HOME] button to confirm, all parameter restore
default, include IR Remote address and VISCA address.
