TP Screw (3x20mm)
8
8
TP Screw (3x20mm)
Washer(3x6mm)
Washer(3x6mm)
2
Main wing joiner(30x515mm)
2
Main wing joiner(20x233mm)
Main wing joiner(30x515mm)A
Main wing joiner(20x233mm)B
Screw (6x50mm)
2
Screw (6x50mm)
Assemble the landing gear to the appropriate position in
the landing gear mount.
Connect the two wings to the fuselage through the wing joiners.
The sketch map of the wing fits well to the fuselage.
Drag the servo line and retracts lines from the wing.
Factory already set blind nuts in the wings, the customers can
fix the wing to the fuselage by tightening the nylon screws.
B'
A
A'
B
Make sure to glue securely.
If not properly glued, a failure in flight may occur.
Temporarily fasten down the main wing and
check its correct position.
Securely glue together.If coming off during flights,
you'll lose control of your airplane which leads
to accidents!
A = A '
B = B '
The sketch map should be when the stabilizer
assembly completion.
17
18
20
21
4
16
19
