Lock Nut (2mm )
Screw (2x10mm)
Ball joint
Washer(2x5mm)
1
Clevis
1
1
Screw (2x10mm)
Nut (2mm )
1
Washer(2x5mm)
4
Pin hinge(36x20x1mm)
2
Horn
2
2
Screw (2x10mm)
Nut (2mm )
2
Washer(2x5mm)
1
Rod (2x200mm)
Rod (2x200mm)
8
TP Screw (2x10mm)
2
2
Screw (2x10mm)
Nut (2mm )
2
Washer(2x5mm)
Connect the steel wires of the rudder horn and
tail gear to the servo.
The sketch map of how the wires working in the
fuselage.
Assemble the servo of the tail landing gear to the
fuselage.
Epoxy the pinned hinges and drill holes through the
tail gear door. Fixing the pinned hinges and horns to
the tail gear door as illustration.
Install the control horn and connect the linkage.
Put the gear door carefully to the tail hatch and connect
the tail gear as illustration.
40
42
43
44
8
41
39
