4
Step 3:
Connect wire D of #02 and wire D of #05. Set console frame (#02) into main frame (#05), and Use
Allen Wrench (as shown in figure) with #10and #14 to fix console frame into #05. Screw it tight after 6
screws are screwed.
Notice: When setting main frame, it needs 2 persons to operate, avoiding connector caught. When
connecting, please note the direction of BNC and do not pull the wire hard.
Step 4:
Fix water holder (#04) into console (#02), Use Open Spanner to and screw #11, #04 tight into #2
Notice: When setting #04 into console (#02), please screw it when the position set correctly. And it takes 2
persons to screw it.
