background image

SAFETY PRECAUTIONS FOR METAL SHEARS

FUNCTIONAL DESCRIPTION

SPECIFICATION

OPERATING PROCEDURES

pacemakers should:

• Avoid operating alone.

• Do not use with trigger locked on.

• Properly maintain and inspect to avoid electrical shock.

• Any power cord must be properly grounded.  Ground Fault Circuit

Interrupter (GFCI) should also be implemented – it prevents sustained

electrical shock. 

WARNING: Handling the cord on this product will expose you to lead, a

chemical known to the State of California to cause cancer, and birth defects or

other reproductive harm. Wash hands after handling.

The warnings, precautions, and instructions discussed in this instruction 

manual cannot cover all possible conditions and situations that may occur.

It must be understood by the operator that common sense and caution are

factors which cannot be built into this product, but must be supplied by the

operator.

120V/60Hz

Rated Power: 4 Amp        

Variable Speed: 0-2500 /min    

Max Cutting Capacity: 18 gauge

Head swivels 360°

9.

10.

Read the ENTIRE IMPORTANT SAFETY INFORMATION

section at the beginning of this manual including all text under 

subheadings therein before set up or use of this product.

 

 
 

 

A. ON - OFF Switch

B. Lock off button

C. Cutting head

A

B

C

4

Summary of Contents for 241-9894











Reviews: