Customer Helpline
1300 889 028
12
NOTE: Before using the tool, read the instruction book carefully.
Intended Use
The electro-tool is intended as a stationary machine for making straight lengthways and
crossways cuts in wood. Horizontal mitre angles of 0~45
o
L&R as well as vertical bevel angles
of 0° to +45° are possible.
ASSEMBLY
1. MITRE TABLE LOCK KNOB (See Fig. A)
1) Place the threaded stud on the end of the mitre table lock knob (9) into the threaded hole
in the control arm.
2) Turn clockwise to tighten.
2. TO INSTALL DUST BAG (See Fig B)
This mitre saw comes with a dust bag (36) to help you keep the work area clean. The dust
bag is ideal for small jobs. Attaching the Dust Bag: Hold the dust bag on both sides of the
metal ring, place it on the dust collection port, and then loosen the metal ring. The dust bag
is well installed by not falling off when being pulled back gently.
Operating Instructions
Assembly
A
B
