Customer Helpline
1300 889 028
16
Trouble Shooting
Maintenance
Remove the battery pack from the tool before carrying out any adjustment, servicing
or maintenance.
Your tool requires no additional lubrication or maintenance.
There are no user serviceable parts in your power tool. Never use water or chemical
cleaners to clean your power tool. Wipe clean with a dry cloth. Always store your power
tool in a dry place. Keep the motor ventilation slots clean. Keep all working controls free
of dust. Occasionally you may see sparks through the ventilation slots. This is normal
and will not damage your power tool.
For Battery tools
The ambient temperature range for the use and storage of tool and battery is 0
o
C-45
o
C.
The recommended ambient temperature range for the charging system during charging
is 0
o
C-40
o
C.
1. WHY DOES THE DRILL NOT TURN ON WHEN YOU PRESS THE SWITCH?
The forward/reverse rotation control, which is on top of the on/off switch, is positioned
in the lock function. Unlock the forward/reverse rotation control by putting it into the
required rotation position. Push the on/off switch and the drill will start to rotate.
2. THE DRILL STOPS BEFORE THE SCREW IS COMPLETELY TIGHTENED. WHY?
Verify the torque position of the torque adjusting ring, you can find the torque-adjusting
ring between the chuck and the drill body. Position 1 is the lowest torque (screw driving
force) and position 18 is the highest torque (screw driving force). Position is for drill
operation.
3. REASONS FOR DIFFERENT BATTERY PACK WORKING TIMES
Charging time problems and having not used a battery pack for a prolonged time will
reduce the battery pack working time. This can be corrected after several charge and
discharge operations by charging & working with your drill. Heavy working conditions
such as large screws into hard wood will use up the battery pack energy faster than
lighter working conditions. Do not re-charge your battery pack below 0
o
C and above 40
o
C
as this will affect performance.
