@ ToolkitRC 2020
35
other functions
1，Firmware upgrade
After connecting the M6D to the computer with the
USB cable in the box, the computer will recognize a USB
disk named Toolkit, download the upgrade file app.upg
on the official website Copy and Paste the new file to
overwrite the previous files in the USB disk, and the
firmware can be upgraded.
2，USB 5.0V output
In addition to the above upgrade function, the USB
interface can also output 2.0A current to charge mobile
devices.
3，Automatically continue to charge and discharge
When a battery is fully charged, unplug the battery
for 2 seconds, connect the next battery, the device will
continue to charge and discharge automatically, you can
set the menu to start and stop this function (Continuous
work mode)
4，Fan level
When the internal temperature of the device
exceeds 45 ℃ , the fan turns on half-speed airflow to
reduce noise. When the internal temperature exceeds
53℃, the fan turns on full-speed airflow to enhance heat
dissipation.
5，Manual voltage calibration
In the shutdown state, press and hold [Scroll Wheel]
and do not release, connect the power supply, the
system will enter the manual calibration voltage function.
Measure the actual voltage of each battery with a
voltmeter, move the cursor to the corresponding voltage
