background image

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). 
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or capturing in 

electronic  data  processing  systems)  requires  prior  written  approval  from  the  publisher.  Reprinting,  also  in  part,  is 

prohibited. This publication reflects the technical status at the time of printing.
Copyright 2021 by Conrad Electronic SE. 

  

*2331500_v1_0221_02_JC_m_en

d) Charging

•  Use only the charger that is associated with the system for charging. Use of 

chargers other than that recommended by us poses is a significant risk of fire or 

explosion of the batteries!

•  Before charging the rechargeable battery, observe the operating instructions of 

the charger.

•  Never leave the battery to charge unsupervised.
•  The rechargeable battery gets warm during the charging process, even at high 

discharge currents. For this reason, it is necessary to ensure sufficient ventilation.

• 

The rechargeable battery fits only in one direction into the charger or battery-

operated power tools. Never use force to insert the rechargeable battery.

• 

Do not charge the rechargeable battery while it is still hot (e.g. after operation in a 

power tool). Allow the battery to cool down to room temperature before attempting 

to recharge it.

•  Never charge a damaged, leaking or deformed rechargeable battery. This 

may cause a fire or explosion! Discontinue use immediately and dispose in an 

environmentally-friendly  manner  of  a  rechargeable  battery  that  has  become 

unusable in this way.

• 

An  unused  li-ion  rechargeable  retains  its  energy  normally  for  several  months; 

however, total discharge will cause permanent damage and result in its being 

unusable.
If the rechargeable battery is to be stored for a long period of time, please note:

 

- Remove the rechargeable battery from the power tool.

 

-

Select a dry and cool place for storage.

 

-

The rechargeable battery should not be fully charged for longer periods of 

storage; an ideal charge status is approximately between 50% and 75%.

 

-

Check the charge status on a regular basis and charge the rechargeable battery 

if necessary.

Product overview

1 2

3

4

Item no. 2331500 (5 Ah)

Unlock button

2  Release latch (locks the rechargeable battery in the power tool; retracts into rechargeable 

battery when unlock button is pressed)

Control button

LEDs for monitoring the charge status

Charging

  Please consult the operating instructions of the charger.

Removing/inserting the rechargeable battery

•  In order to remove the rechargeable battery from a power tool, press and hold the unlock 

button on the rechargeable battery and then remove the rechargeable battery from the power 

tool. Do not use any force.

•  To insert the rechargeable battery in a power tool, simply slide the battery with correct 

orientation into the corresponding battery intake of the power tool until it engages. Do not 

use any force.

  The charger does not have an engaging function, the rechargeable battery can 

simply be pulled out of the charger.

Control button and LED indicators

 Important!

 

Before you use the control button, cease operation with the power tool. Wait until the 

drive of the power tool completely stops and no tool parts are turning.

On one side of the rechargeable battery, there is a control button and 3 LEDs. Press the control 

button to show the battery capacity.
The more LEDs that light, the greater the rechargeable battery’s charge level. If none of the 

LEDs light up, this means that the rechargeable battery is empty and has to be recharged 

immediately.

Care and Cleaning

• 

Remove the rechargeable battery before cleaning from the power tool or the charging device.

• 

A dry, soft and clean cloth is sufficient for cleaning the exterior.

• 

Dust can be easily removed using a clean, long-haired brush and a vacuum cleaner.

•  Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these may 

damage the housing or cause the product to malfunction.

Disposal

a) Product

  Electronic devices are recyclable waste and must not be disposed of in the 

household waste. At the end of its service life, dispose of the product according to 

the relevant statutory regulations.

b) Battery information

  You  as  the  end  user  are  required  by  law  (Battery  Ordinance)  to  return  all  used 

batteries/rechargeable batteries. Disposing of them in the household waste is 

prohibited.

 

Contaminated (rechargeable) batteries are labelled with this symbol to indicate that 

disposal in the domestic waste is forbidden. The designations for the heavy metals 

involved are: Cd = Cadmium, Hg = Mercury, Pb = Lead (name on (rechargeable) 

batteries, e.g. below the trash icon on the left).

Used (rechargeable) batteries can be returned to collection points in your municipality, our 

stores or wherever (rechargeable) batteries are sold.
You thus fulfil your statutory obligations and contribute to environmental protection.

Technical Data

Item no.

2331500

Rechargeable battery technology

Li-Ion

Voltage

20 V

Capacitance

5 Ah

Dimensions

120 x 80 x 70 mm

Weight

670 g

Summary of Contents for AP-1100

Page 1: ... beschädigt werden Bewahren Sie Akkus deshalb an einer geeigneten Stelle auf Der Akku darf nicht feucht oder nass werden schützen Sie den Akku auch vor Kälte Hitze und Sonneneinstrahlung Wird dies nicht beachtet so verringert sich nicht nur die Lebensdauer des Akkus sondern er kann auch beschädigt werden Außerdem besteht in Extremfällen Explosionsgefahr Stellen legen Sie keine Gegenstände auf den ...

Page 2: ...den Akku aus einem Elektrowerkzeug zu entnehmen halten Sie die große Entriegelungstaste auf dem Akku gedrückt und ziehen Sie den Akku dann aus dem Elektrowerkzeug heraus Wenden Sie dabei keine Gewalt an Um den Akku in ein Elektrowerkzeug einzusetzen schieben Sie den Akku einfach in richtiger Orientierung in die entsprechende Akkuaufnahme des Elektrowerkzeugs bis der Akku einrastet Wenden Sie dabei...

Page 3: ...ith these liquids could be severely damaged Thus store batteries rechargeable batteries in a suitable location The rechargeable battery must not get damp or wet shield the rechargeable battery from cold heat and sunlight Failure to observe this can not only reduce the operating life of the rechargeable battery but can also result in damage In extreme cases there is also a risk of explosion Do not ...

Page 4: ...e consult the operating instructions of the charger Removing inserting the rechargeable battery In order to remove the rechargeable battery from a power tool press and hold the unlock button on the rechargeable battery and then remove the rechargeable battery from the power tool Do not use any force To insert the rechargeable battery in a power tool simply slide the battery with correct orientatio...

Reviews: