6 Overview of product
1
2
3
4
5
6
7
8
9
10
11
13
12
1 Foam padding
2 Headband adjustment wheel
3 On/off switch for LED light
4 USB charging port and charging cable
5 Height adjustment wheel for eyeglass arm
6 Storage case and the lenses
7 Rear lens
8 Front lens
9 LED light (detachable)
10 Lens adjustment area
11 Additional magnifier
12 Eyeglass arm
13 Headband
7 Operation
7.1 Settings
Below the centre there is a U-shaped notch on the lenses
(7)/(8)
, which shortens the
distance to the eye and widens the viewing area to enable you to view an object more
easily.
The movable plug connection for the double lenses
(7)/(8)
allows you to adjust the focal
length between lenses and objects as well as between lenses
(7)/(8)
and your eyes. See
section 7.6 Setting the focal length.
The product has an additional magnifier (11) that you can fold down to view a detailed
enlargement of the object. See section 7.3 Folding the additional magnifier up/down.
The entire lens arm (12) can be folded up and down. The height adjustment wheels (5)
ensure that the eyeglass arm (12) remains in the desired position without dropping down.
See section 7.5 Folding up the eyeglass arm.
The LED light (9) is battery-operated and has a weak and a strong light mode. To switch
between the light modes, press the on/off button for the LED light
(3)
repeatedly.
For optimal illumination, you can adjust the viewing angle of the LED light (9). See section
7.4 Adjusting the LED light angle.
To charge the LED light (9) via the USB charging port (4), remove it from the lens arm (12).
See section 7.8 Removing and charging the LED light.
7.2 Changing the lenses
Change the lens on the plug-in connections
to achieve your desired magnification level.
7.3 Folding the additional magnifier
up/down
Fold the additional magnifier (11) up or down
as required.
7.4
Adjusting the LED light angle
Slide the LED light (9) to the desired angle.
7.5
Folding up the eyeglass arm
Fold the glasses arm (12) up to 45° to
remove the lenses from the field of view
without taking off the headband magnifier.
Tighten
Loosen
7.6 Setting the focal length
To adjust the focal length, move the lenses
(7)/(8)
horizontally along the adjustment
area (10).
7.7
Adjusting the headband width
Use the headband adjustment wheel (2)
to adjust the headband width to your head
circumference.
Narrower
Wider
7.8 Removing and charging the LED light
To charge the LED light (9), remove it from
its position. To do this, fold the LED light
(9) up completely and then pull it off in an
upwards direction (see diagram).
Charge the LED light (9) using the supplied
USB charging cable (4) and a suitable power
adapter. Make sure that your power supply
complies with the required technical data.
Then insert the LED light (9) back into the
holder from above and ensure that it snaps
into place. Set the desired angle to use the
LED light (9) again.
