34
h) Restore factory default settings “FAC”
To restore all settings to factory defaults:
1. Enter the settings menu and navigate to “FAC.
2. Choose the “on” setting.
3. Save the setting and exit.
1
Default settings
Setting
Defaults
Description
Ht
OFF
Working timer
Loc
OFF
Temperature lock
C-F
°C
Switch between °C and °F temperature units
CAL
No compensation
Temperature calibration
bL
ON
System sound “beep” (ON / OFF)
PSd
OFF
Passcode
FAC
OFF
Restore factory settings
Memory 1
Unheated air / 50 %
Cool air “CL” / airflow percentage
Memory 2
300 °C / 50 %
Temperature / airflow percentage
Memory 3
400 °C / 50 %
Temperature / airflow percentage
12. Troubleshooting
Error
Possible cause
Suggestion
There is no temperature reading.
Please contact technical support service or
other technical personnel.
The maximum temperature was
exceeded.
•
Reduce the temperature setting.
• Switch the main power
OFF
, wait 20 min-
utes then turn back
ON
.
• If still receive the error code, please contact
technical support service or other technical
personnel.
No power to the worksta-
tion.
Power cable is not connected
Make sure it is plugged in correctly.
The fuse has blown
Check the fuse. See “13. Replacing the fuse”
on page 35.
