• Consult an expert when in doubt about the operation, safety or connection of the
appliance.
•
Maintenance, modifications and repairs must only be completed by a technician
or an authorised repair centre.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
b) Connected devices
• Also observe the safety and operating instructions of any other devices which are
connected to the product.
c) LED light
• Attention, LED light:
- Do not look directly into the LED light!
- Do not look into the beam directly or with optical instruments!
d)
(Rechargeable) Batteries
• Correct polarity must be observed while inserting the (rechargeable) battery.
• The (rechargeable) batteries should be removed from the device if it is not used
for a long period of time to avoid damage through leaking. Leaking or damaged
(rechargeable) batteries might cause acid burns when in contact with skin, therefore
use suitable protective gloves to handle corrupted (rechargeable) batteries.
• (Rechargeable) batteries must be kept out of reach of children. Do not leave
(rechargeable) batteries lying around, as there is risk, that children or pets swallow
them.
• All (rechargeable) batteries should be replaced at the same time. Mixing old and
new (rechargeable) batteries in the device can lead to (rechargeable) battery
leakage and device damage.
•
Rechargeable batteries must not be dismantled, short-circuited or thrown into fire.
Never recharge nonrechargeable batteries. There is a risk of explosion!
Operating Elements
1
2
3
4
5
6
8
9
7
11
10
12
13
14
15
17
16
1 Main magnifying lens
2 Secondary magnifying
lens
3 Power switch
4
Magnifier angle fastening
5 Support rod
6 Height adjustment knob
7 Power switch
8 Flexible gooseneck
9 Soldering iron stand
10 Base
11 5 V/DC input jack
12 Soldering iron stand base
with locking screw
13 Abrasive paper
14 Storage tray
15 Adjustable third hand with
two alligator clips
16 Third hand angle
fastening
17 Replaceable magnifying
lens barrels
Operating Instructions
Helping Hand Magnifier
Item No. 2126185
Intended Use
This product is designed as an auxiliary tool for applications, such as soldering circuit boards,
building models, macro photography, engraving, jewellry cleaning or appraisal, coin or stamp
collecting, embroidery and more. The product has different magnification lenses, a “third hand”
and LED lighting to facilitate your work.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in
bathrooms, must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use
the product for purposes other than those described above, the product may be damaged. In
addition, improper use can result in short circuits, fires, electric shocks or other hazards. Read
the instructions carefully and store them in a safe place. Make this product available to third
parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
Delivery Content
•
Magnifier
• Spare lens (10x)
• USB cable
• Operating instructions
Up-to-date Operating Instructions
Download the latest operating instructions at www.conrad.com/downloads or
scan the QR code shown. Follow the instructions on the website.
Explanation of Symbols
The symbol with the lightning in the triangle is used if there is a risk to your health,
e.g. due to an electric shock.
The symbol with the exclamation mark in the triangle is used to indicate important
information in these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and advice on operation.
Safety Instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information
on proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
a) General Information
• The product is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become
dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, steam and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed
if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height
can damage the product.
• Always cover the magnifying glass when it’s not in use, otherwise there is a risk of
fire due to the burning glass effect in direct sunshine.
• Never leave the lamp without supervision when it is in use.
• Do not subject the product to dripping water or water spray.
•
Risk of fire and burns! Never position the product in the vicinity of combustible or
easily flammable material, (e.g. curtains, decorative materials etc.)! The soldering
iron stand
(9)
, base with locking screw
(12)
, and the area around it will become
hot when used while soldering.
• Never cover the lamp when it is switched on.
• Do not place the lamp on an unstable surface. People may be hurt if the product
falls.
