• Please handle the product carefully. Jolts, impacts or a fall even from a low height
can damage the product.
• Consult an expert when in doubt about the operation, safety or connection of the
appliance.
•
Maintenance, modifications and repairs must only be completed by a technician
or an authorised repair centre.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
• In schools, educational facilities, hobby and DIY workshops, the product must be
operated under the supervision of qualified personnel.
• Always comply with the accident prevention regulations for electrical equipment
when using the product in commercial facilities.
c) Operation
• Never touch the heating element or tip of the soldering iron. Risk of burns!
• Never use the soldering iron to heat up liquids.
• Never solder live electrical components or parts. Always switch off the power
before-hand.
• Do not cover or fasten any items to the soldering iron. Otherwise there is a risk
of fire.
• Touching or soldering capacitors (or similar components) or leads/cables that are
connected to capacitors may cause a fatal electric shock! Capacitors may stay
charged for several hours after you switch off the power supply!
•
Risk of fire or explosion! Do not use around or near explosive or flammable
materials. Always solder on non-flammable surfaces.
• The hot air gun and soldering iron must be placed in the designated holder when
not in use.
d) Work Safety
•
Ensure that there is sufficient lighting.
•
Ensure proper ventilation during soldering. Solder and flux vapours can be harmful
to your health.
• Wash your hands thoroughly after working with solder. This is particularly
important when using lead-based solder.
• Do not put soldering alloys into your mouth. Do not eat or drink during soldering.
• Wear suitable protective clothing and safety goggles when soldering. Liquid/
splashing solder may cause serious burns or eye damage!
e) Wireless Charging
• Use a suitable USB power supply or power bank as a power source, and only use
the supplied cable.
• Never connect the product to a USB port on a PC or notebook computer. The
USB port to which the product is connected should supply an output current of
1.6A (8W).
•
Risk of fire. Do not place any objects between the charging device and the wireless
charging platform. Do not scratch or puncture the charging platform.
• Never leave the product unattended during use, and disconnect the charger from
the power supply when not in use.
• It is normal that a certain amount of heat is generated during charging. During
charging, place the product on a surface that is not heat-sensitive.
f) Battery
• Never short-circuit the contacts of the rechargeable battery. Do not throw the
battery or the product into fire. There is a danger of fire and explosion!
• Correct polarity must be observed while inserting the (rechargeable) battery.
• The (rechargeable) battery should be removed from the device if it is not used
for a long period of time to avoid damage through leaking. Leaking or damaged
(rechargeable) batteries might cause acid burns when in contact with skin,
therefore use suitable protective gloves to handle corrupted (rechargeable)
batteries.
• (Rechargeable) batteries must be kept out of reach of children. Do not leave
(rechargeable) batteries lying around, as there is risk, that children or pets swallow
them.
•
Rechargeable batteries must not be dismantled, short-circuited or thrown into fire.
Never recharge nonrechargeable batteries. There is a risk of explosion!
Operating Instructions
Cordless Soldering Iron Set
Item No. 1891384
Intended Use
The product is a charging stand with cordless soldering iron for use in applications such as
consumer electronics, appliance repair, arts and crafts. The stand has an integrated wireless
charging platform and soldering tip cleaner.
The USB port to which the product is connected should be capable of delivering an
output current of 1.6 A (8W). Use a USB power supply or power bank as a source of
power.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in
bathrooms, must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use
the product for purposes other than those described above, the product may be damaged. In
addition, improper use can result in short circuits, fires, electric shocks or other hazards. Read
the instructions carefully and store them in a safe place. Make this product available to third
parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
Delivery Content
• Soldering iron
• Charging stand
• USB power cable
• Rechargeable battery
• Operating instructions
Up-to-Date Operating Instructions
Download the latest operating instructions at www.conrad.com/downloads or
scan the QR code shown. Follow the instructions on the website.
Explanation of Symbols
The symbol with the lightning in the triangle is used if there is a risk to your health,
e.g. due to an electric shock.
The symbol with the exclamation mark in the triangle is used to indicate important
information in these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and advice on operation.
Safety Instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
a) Important Safety Information
• For safety reasons, this device must not be used by children and young people
under the age of 8 years, or by people who are not familiar with these operating
instructions. Children must not play with this device.
• This product is not intended to be used by people (including children) with
impaired physical, sensory or mental capabilities or lack of experience and/or lack
of knowledge.
b) General Information
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become
dangerous playing material for children.
•
Protect the appliance from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, steam and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed
if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
-
has been subjected to any serious transport-related stresses.
