20
support.
13.
SECURE THE WORK.
Use clamps or a vise to hold the work when practical. It’s safer than using your hand and it frees
both hands to operate tool.
14.
MAKE SURE
all clamps and locks are firmly tightened before drilling.
15.
SECURELY LOCK THE HEAD
and table support to the column, and the table to the table support before operating the
drill press.
16.
NEVER
turn your drill press ON before clearing the table of all objects (tools, scraps of wood, etc.).
17.
BEFORE STARTING
the operation, jog the motor switch to make sure the frill bit does not wobble or vibrate.
18.
LET THE SPINDLE REACH FULL SPEED
before starting to drill. If your drill press makes an unfamiliar noise or if it
vibrates excessively, stop immediately, turn the drill press OFF and unplug. Do not restart the unit until the problem is
corrected.
19.
DO NOT
perform layout assembly or set up work on the table while the drill press is in operation.
20.
USE THE RECOMMENDED SPEED
for any drill press accessory and for different workpiece material.
21.
WHEN DRILLING
large diameter holes, clamp the workpiece firmly to the table. Otherwise, the bit may grab and spin
the workpiece at high speeds. DO NOT USE fly cutters or multiple-part hold cutters, as they can come apart or become
unbalanced in use.
22.
MAKE SURE
the spindle has come to a complete stop before touching the workpiece.
23.
TO AVOID INJURY
from accidental starting, always turn the switch OFF and unplug the drill press before installing or
removing any accessory or attachment or making any adjustment.
Summary of Contents for TFD-32TE
Page 17: ...14 SCHEMA DE MONTAGE VUE ECLATEE...
Page 34: ...31 ASSEMBLY DIAGRAM...
