Tonone Beads direct Manual Download Page 43

43

8 Environment

8.1  

Collection and recycling

Please note that the Beads lamp requires special waste handling and may not be placed in unsorted waste 
for removal. Please consult the local authorities regarding the recycling options of the Beads lamp at the 
end of its lifecycle. Do not throw away electrical appliances and components. Find out whether the Beads 
lamp (or its components) can be collected, recycled or reused.

8.2  

RoHS compliance

This product meets the requirements of Directive 2002/95/EC of the European Parliament and the 
Commission of 27 January 2003 concerning restrictions of certain hazardous substances in electrical 
appliances (RoHS) and the amendments to that directive

8.3  

WEEE marking

The WEEE (Waste Electrical and Electronic Equipment) Directive, which came into 
effect in Europe on February 13, 2003, has resulted in a fundamental shift in the 
processing of electrical equipment at the end of their life cycle. The directive is 
intended to reduce the amount of electrical appliances and electronic equipment that 
ends up in landfill and, to that end, ensure that such equipment is recycled, reused or 
recovered in other ways. A WEEE logo on a product or on its packaging means that the 
product may not be disposed of or collected with ordinary household waste. 

All old electronic or electrical appliances must be disposed of at special collection facilities for hazardous 
waste. Separate collection and correct processing of old electronic and electrical equipment will help 
us maintain our natural resources. In addition correct recycling goes to benefit the safety and health of 
mankind and the environment. To find out more about the processing and collection of electronic or 
electrical equipment, about reuse or collection facilities, please contact the municipality, the local 
waste management company, the store at which you purchased the appliance or the manufacturer of the 
appliance.

8 Milieu

8.1  

Inleveren en recycling

Informeer binnen uw regio naar de mogelijkheden om de Beads lamp in te leveren bij beëindiging van 
het gebruik. Gooi elektrische apparaten en onderdelen niet weg, maar bekijk of (onderdelen van) Beads 
ingeleverd, gerecycled of hergebruikt kunnen worden.

8.2 RoHS-naleving

Dit product voldoet aan richtlijn 2002/95/EC van het Europese Parlement en de Raad van 27 januari 2003 
aangaande de beperking van het gebruik van bepaalde milieugevaarlijke stoffen in elektronische apparatuur 
(RoHS) en de aanpassingen van die richtlijn.

8.3 WEEE-kennisgeving

De WEEE-richtlijn (Waste Electrical and Electronic Equipment), die als Europese wet 
van kracht werd op 13 februari 2003, heeft geresulteerd in een belangrijke verandering 
in de behandeling van elektrische apparatuur aan het einde van hun gebruikscyclus. 
Het doel van deze richtlijn is ten eerste het voorkomen van elektrische apparatuur in 
het afval en bovendien het bevorderen van hergebruik, recycling en andere vormen 
van herstel van dergelijk afval teneinde de hoeveelheid afval te beperken. Het WEEE-
logo op een product of op de verpakking geeft aan dat dit product niet samen met het 
huishoudelijk afval mag worden afgevoerd of weggegooid. 

U dient al uw oude elektronische of elektrische apparatuur af te voeren via speciale verzamelpunten van 
dergelijk gevaarlijk afval. Afzonderlijke inzameling en correcte behandeling van oude elektronische en 
elektrische apparatuur helpt ons natuurlijke bronnen in stand te houden. Bovendien waarborgt de correcte 
recycling de veiligheid en gezondheid van de mens en zijn omgeving. Voor meer informatie over het 
verwerken van elektronische en elektrische apparaten, hergebruik en verzamelpunten, neemt u contact op 
met uw gemeente, uw plaatselijk milieubedrijf, de winkel waar u het apparaat heeft gekocht of de fabrikant 
van het apparaat.

Summary of Contents for Beads direct













































Reviews: