TONO Theta-9000e, Manual, Page: 6 / 71

3
20. Printer Interface
Centronics Parallel Compatible interface enables easy connection of a low-cost dot-matrix print-
er for hard copies.
21. Wide range of transmitting and receiving speeds
10 communications speed for transmitting (with AUTOTRACK on receive) in Morse Code and 14
communication speeds with Fine Adjustments for transmitting and receiving in Baudot and AS-
CII. The multiple speed feature makes the Θ-9000E ideal for amateur, business and commer-
cial use.
22. Pre-load function
The Buffer Memory can store the messages written from the keyboard instead of sending them
immediately. The stored messages can then be sent with a keyboard command.
23. "RUB-OUT" function
You can correct mistakes while writing messages in the Buffer Memory and misspellings can be
erased while the information is still in the Buffer Memory.
24. Automatic CR/LF
While transmitting, CR/LF is automatically sent every 64, 72 or 80 characters.
25. WORD MODE operation
Characters can be transmitted in word groupings from the Buffer Memory. Keyboard-Selctable.
26. LINE MODE operation
Characters can be transmitted in line groupings from the Buffer Memory. Keyboard-Selectable.
27. WORD-WRAP-AROUND
In receive mode, WORD-WRAP-AROUND prevents the last word on a line from becoming split
in two and provides you a readable screen.
28. Automatic Idle Signal Insertion
In RTTY mode, idle signal can be automatically inserted in a pause of transmitting.
29. "ECHO" function
With a keyboard instruction, received data can be read and resent at the same time. This func-
tion enables the cassette tape recorder to be used as the back-up memory and a system can
be created as effective as paper tape storage.
30. Cursor Control function
Full cursor control (up/down-left/right) is available from the keyboard.
31. Test Message function
Two built-in test messages, "RY" and "QBF" are keyboard selectable.