TONO Theta-9000e, Manual, Page: 58 / 71

55
EXAMPLE 1 Emphasized character print
Press CTRL | ESC (1BH code) and SHIFT !
·
1
(21H code) to activate emphasized character se-
quence which you desire to emphasize. This com-
mand continues until
CTRL | ESC (1BH code) and
SHIFT "
·
2
(22H code) are pressed.
EXAMPLE 2: Under Line
The character sequence inserted between the key-
stroke
CTRL
|
ESC
(1BH)
X
(58H) and
CTRL
|
ESC (1BH) Y (59H) can be underlined.
EXAMPLE 3: Elongated character print
Put the character sequence between the keystroke
CTRL N (0EH) and CTRL O (0FH) to elongate
characters you desire.
EXAMPLE 4: Line Feed pitch
' ·B ' shows that
CTRL
|
ESC B
are pressed and
1/8" line feed pitch mode is active. After pressing
CTRL | ESC A , 1/6" line feed pitch mode be-
comes active.
NOTE: The above-mentioned control code is shown as · on the screen. The control signal
varies with each printer, so follow your printers's instruction manual before opera-
tion. Be sure that control code is transmitted to the printer, but not printer out.
8-4-2 Tape recorder
(1) How to record a completed text with a tape recorder
The output signal in ASCII code (1 start bit, 8 data bits and 2 stop bits), 300 baud
and KCS modulation, is available from the AFSK OUT jack.
(a) Connect a tape recorder to the Θ-9000E (refer to Figure 17).
(b) Move the cursor to the head of a line.
(c) Press T n SHIFT | RETURN ( n identifies keys !
·
1 thru #
·
3 and selects
the page).
(d)
TITLE ?
is displayed on the screen.
(e) Enter a title of six characters or less on the keyboard.
(f) Press SHIFT | RETURN to record the text in the tape recorder.