37
7-2-4 How to Receive Graphic Patterns
When signals of graphic patterns are received in the Graphic Mode, the screen is switched
automatically to the Graphic Receive Screen Mode. Practice transmitting or receiving
graphic patterns with a cassette tape recorder and the like.
7-3
Control Code Output
When you press
'
·
@
A
to
Z
{
·
[ !
·
1 }
·
] ~
·
^ BS
·
_
while pressing
CTRL
, the corresponding control code is transmitted. The serial output (every jack output
of CW, FSK, AFSK OUT, RS232C OUT) varies depending on the mode used.
Serial Output
Printer port
CW (MORSE)
No output
RTTY (BAUDOT)
CTRL G
,
CTRL J
or
CTRL M
transmits control codes. The others transmit
LETTER code.
Every control code is sent.
ASCII
Every control code is transmitted.
Table 12
Main Control Codes
CTRL H
returns the cursor one step to the left (same as
SHIFT BS
·
_
).
CTRL I
shifts the cursor 8 steps (for 8 character spaces) to the right.
CTRL J
shifts the cursor to a new line (same as
LINE FEED
).
CTRL M
shifts the cursor to the line head (same as
RETURN
).
CTRL G
transmits BEL code, making a pulse sound.
CTRL {
·
[
transmits ESC (1BH) code.
CTRL
|
ESC
transmits ESC (1BH) code. No signal is transmitted when only
ESC
is pressed.
When the control codes are received, they offer the same function as mentioned above.
For all control codes associated with the keys, refer to Table 16.
7-4
Selective Calling System
7-4-1 Introduction
It is possible to use Selective Calling System in every mode. The keystroke
ESC "
·
2
ac-
tivates the function and
FUNC=SEL
is displayed on the screen.
When using the SEL-CAL system, your own "SEL-CAL Characters" and "End of Text" should
be stored in channel 6 prior to the operation.
Receipt of your own "SEL-CAL Characters" causes the storage of text in memory and the
text may be displayed on the screen and printed out to the printer. At this moment, the RE-
MOTE jack is turned ON.
Summary of Contents for Theta-9000e
Page 1: ...9000E COMMUNICATIONS TERMINAL...
Page 71: ...68 9000E BLOCK DIAGRAM...