Version 8.1
Page
22
Operating Instructions
1. Activation of units
When the call button on the outside camera unit is pressed, the indoor unit chime
rings and the visitor’s picture will appear on the indoor monitor. After the visitor is
visually identified, and you wish to talk with the visitor, touch the
button. The
unit will remain activated for approximately 80 seconds before it automatically shuts
off. To re-activate for continued conversation, touch the
button and then touch
the
button.
2. Activation of outside unit from monitor unit
a) Touch the
button of the indoor unit at any time and the outdoor camera will
be activated and show the outside view.
b) If you have installed two cameras, touch this button to change from camera
one to another.
3. Working time
a) Call time: Approximately 40 seconds
The picture terminates automatically if indoor unit is not answered within
approximately 40 seconds after the call button of the outdoor camera unit is
touched.
b) Talk time: Approximately 80 seconds
When monitor unit is called by the outdoor unit and the monitor is answered,
there is approximately 80 seconds of time available before the unit
automatically shuts off.
c) Monitor time: Approximately 40 seconds
When outside camera is activated from the inside, there is approximately 40
seconds of viewing time before the unit automatically shuts off.
4. Activation of “Intercom” button
An intercom calling can be started by any indoor monitor when it is on standby
mode.
When the intercom button
on one indoor monitor is touched, this will ring all
monitors in a system,you can talk with the one calling monitor by touching the
button on the second monitor, touch
for shutting off. There is approximately 80
seconds of time before the unit automatically shuts off.
5. Activation of
button
Door open:
If an electrical lock or door strike is added to the installation, connect it to the
terminals at the back of the roadside panel.
This function can only be used when the screen is switched on. It is normal that
the image switches off one moment following the control of the door open.
If you want to open the door to let the caller in, just touch the
button on the
indoor monitor.
Summary of Contents for 683300
Page 12: ...Version 8 1 Page 12...
