Tonna 683300, Safety & Operating Instructions Manual

Page: 21 / 23

Version 8.1 Page
21
D) Installation of outdoor camera
Add the name to the nameplate
1) Remove the cover of the name plate by pressing the left hand side of the block.
(Fig. A & B)
2) The name plate is now accessible (Fig. C)
3) Mark your name on the plate (Fig. C)
4) Place the button block back to the panel (Fig. D)
Mark Mark
A B C D
Mounting the camera
1) Remove the front cover (Fig. E & F)
2) Mount the outdoor unit on the wall by using 2 mounting screws and wall plugs.
Adjust the camera angle if necessary. (Fig. G & H)
3) Replace the front cover and security it by replacing the 2 screws at the bottom of
the camera. (Fig. I)
E F G H I
Performance Settings
You can adjust the brightness, contrast and colour of the monitor when it is ON by
pressing the Menu button at the side of the monitor.
Press the Menu button then the brightness, contract and colour indication will appear.
To select the indication by pressing the Up and Down buttons, then press the Menu
button to confirm the selection and then press the Up and Down buttons to adjust.
Finally, press the Menu button to confirm the setting.