Tone PW200, Instruction Manual

Page: 4 / 12

5
WARNING
● Use adequate air hose.
○ Use adequate air hose listed on page 19.
○ Use oil and abrasion resistant air hose.
○ Never use deteriorated or overlong air hose.
Failure to follow these instructions may result in
malfunction or deficiency in wrench performance.
● Ensure air inlet fitting is securely connected.
○ There is a high risk of whipping air hose when hose is
accidentally comes off the pneumatic wrench.
○ Air inlet fitting must be securely connected to the air
hose and the pneumatic wrench.
○ Use adequate air inlet fitting listed on page 19.
Failure to follow these instructions may result in serious
accident and injury.
● Beware of fall down accident when working at a high
place.
○ Wear safely belt.
○ Provide safety net or canvas as safeguarding against
falling items.
○ Confirm that no one is underneath the working site before
operation.
○ Stop operation when physically or mentally tired.
Failure to follow these instructions may result in fall
down accident.
6
WARNING
● Avoid overloading.
○ Use pneumatic wrench and its accessories within the rated
specification.
Overloading of the wrench and its accessories may result
in damage of the wrench or its accessories; or accident
or personal injury.
● Properly install the socket as described in this
manual.
Incomplete installation may result in accident and
personal injury.
See “CHANGING SOCKETS” on page 15 - 17
● Avoid accidental starting.
○ Ensure the switch is in the off-position before
connecting air hose.
○ Never carrying the wrench with your finger on the switch
when air compressor is powered on.
Failure to follow these instructions may result in
accidental starting and personal injury.
● Disconnect the air hose when:
○ not in use.
○ changing accessories.
○ inspection and maintenance.
○ or other danger is foreseen.
Failure to follow these instructions may result in
accidental starting and personal injury.