Tone PW200, Instruction Manual

Page: 2 / 12

1
INTRODUCTION
Thank you for purchasing the LeJeune PNEUMATIC SHEAR WRENCH
■ Upon receipt, check and confirm the following:
- Check any transport damages.
- Check for any loose or lost screws and bolts.
- Check the model as per order.
- Check all the accessories are contained. (see page 20)
If any problems are found, contact your LeJeune Bolt Company
■ Read this instruction manual carefully before use.
Full understanding of manual is essential to prevent
personal injury or malfunction.
■ Keep this manual in a bag attached to the back of metal
case lid for easy and quick reference.
■ If manual or warning label is lost or becomes illegible,
or if additional manual is required, contact LeJeune Bolt
Company.
If you have any questions about the products or the
contents of this instruction manual, contact LeJeune Bolt
Company.
■ This manual is only applicable to outside of Japan.
SAFETY INSTRUCTIONS
2
This manual specifies three (3) basic safety
instructions:
DANGER WARNING CAUTION
■ Instructions are classified by degree of risk and
described as follows:
DANGER
Danger is used to indicate threatening
dangerous or unsafe practices which could
imminently result in severe personal
injury or death in the worst case.
WARNING
Warning is used to indicate hazardous or
unsafe practices which could result in
severe personal injury or death in the
worst occasion.
CAUTION
Caution is used to indicate hazardous or
unsafe practices which could result in
personal injury or product or property
damage.
Even if the risk is classified as CAUTION , risk could
become more serious result depending on conditions. Make
sure to follow all instructions when using..
TABLE OF CONTENTS
1 .