Tomy TF550, Instructions Manual

Page: 2 / 25

Important! Always position Baby Unit at least 1
metre (but no more than 3 metres away) from
your baby. Ensure all parts are kept out of baby’s
reach. Never place any parts of the monitor in or
on a cot. Keep cot sides and ends at least 40cm
from surrounding furniture.
SET UP
Switch On & Connect
Press and hold the button until it glows green and
the LCD screen activates.
Press and hold to talk to your baby, partner or sitter.
Press and the Parent Unit will vibrate when alarms
sound or louder noises are detected (cries rather than
gurgles).
Some parents, especially those hard of hearing,
find this a useful feature to support sound monitoring.
2-Way Talkback
Slide the switch up and the monitor will mute 15
seconds after your baby settles.
Mute continues until a set threshold is breached by
louder noises. For example, a cry rather than a
gurgle. Ideal for when baby is a little older and you no
longer want to hear every sound.
Sound Activation
Press to switch between time and temperature.
To set the time, press and hold until the hour
numbers flash. Use + and - buttons to adjust. Press
again to skip to minutes. And again to set when
adjustment is complete.
Time
To locate a lost Parent Unit, press the Baby Unit’s
button three times in quick succession to activate the
Parent Unit’s pager. Its alarm will sound for 60 seconds.
press any button on your parent unit to silence the
alarm sooner.
PAGER
Switch On & Connect
Press and hold the button until it glows green.
BABY UNIT
PARENT UNIT
1
Temperature
Monitor your nursery’s temperature at a glance.
Press the button to light up the colour-coded
indicator:
Blue
Cold less than 16ºC
Yellow Ideal 16ºC - 20ºC
Orange Warm 20ºC - 24ºC
Red Hot more than 24ºC
Health professionals recommend an ideal room
temperature of 16ºC - 20ºC (Yellow).
Lullabies
Press to activate a 10-minute lullaby.
Press again to switch between songs:
1. “Sleep-Baby-Sleep”
2. “Brahms Lullaby”
3. “Rock-a-bye Baby”
To end the lullaby sooner, press and hold the button.
The Baby Unit automatically remembers the last
lullaby played.
Use the Baby Unit without monitoring. With the unit
switched off, press and hold your chosen function key:
. The button will glow red indicating
‘independent mode’.
This mode means you can go on using the Baby
Unit even when your baby is older and no longer
needs monitoring.
Audio alarms will sound to indicate:
Alarms
(x3 per minute) (Continious beep)
LOW BATT LOST LINK
Nightlight
Temperature
Lullabies
Vibrate
Talkback
Nightlight
Sound
Activation
Lullabies
Sound
Sensitive
Lights
Clock
Temperature
Vibrate
Volume
Activate baby’s nightlight by pressing the button.
Adjust the brightness while the nightlight is switched on by
pressing and holding the button on the Baby unit.
Release when you reach desired brightness.
The Baby Unit will remember the brightness setting
when you switch off.
Nightlight
Indepedent Use......
Temperature
Microphone
ure
3
8Hrs
2
EN