11
DOWNROD
WHITE SUPPLY
WIRE
BLACK FAN WIRE
RCK55 RECEIVER
TO
110V
SUPPLY
YELLOW RECEIVER WIRE
WHITE FAN WIRE
BLUE RECEIVER WIRE
BLUE FAN WIRE
BLACK
SUPPLY
WIRE
WHITE
RECEIVER WIRE
BLACK RECEIVER WIRE
BLACK/WHITE
RECEIVER WIRE
YELLOW FAN WIRE
Figure 15
Check to see that all connections are
tight, including ground, and that no
bare wire is visible at the wire connec-
tors, except for the ground wire. Do
not operate fan until blades are in
place. Noise and fan damage could
result.
!
WARNING
OUTLET
BOX
RECEIVER
CEILING
COVER
HANGER
BRACKET
1-1/4"
THREADED
STUDS (2)
Figure 16
4.
After connections have been made, sepa-
rate the white and green wires from the
black, blue and yellow wires (Figure 16).
5.
Carefully turn the wires upward and insert
them up through the open side of the hang-
er bracket and into the outlet box. Push the
green and white wires into one side of the
outlet box; push the black, blue and yellow
wires into the other side of the outlet box.
6.
Screw two 1-1/4” threaded studs (supplied)
into the tapped holes in the hanger bracket
(Figure 16).
BP7288-1 TB301 Paradise Key 6/17/13 10:29 PM Page 11
