Pg. 7
5. Make sure the seat is tight enough so that you can’t twist
it out of alignment. Pull the seat clamp handle away from
the seat post and slide the seat up or down to adjust it.
Move the clamp handle inward toward the seat post so it is
held tight by the clamp.
If necessary, tighten the clamp by twisting the clamp handle
clockwise while in the unclamped position. Then, fold the
handle in toward the seat post. This should require a fair
amount of force to ensure the seat post is held tight. If
necessary, the clamp can be further tightened with an allen
wrench while in the clamped position. Make sure the seat is
not set with the vertical maximum height marks above the clamp.
6. Using the wrench provided in the tool kit, attach and
tighten the pedals. PLEASE NOTE – The pedals are marked
“L” for Left and “R” for Right. The left pedal is attached by
turning it counterclockwise and the right pedal is tight-
ened by turning it clockwise. Make sure the pedals are
tightly attached to the crank arms to prevent stripping.
Item
Nm
in.-lb.
ft.-lb.
Handlebars
6
53
Handlebar Stem
12
106
Pedals
3 - 4.9
26.5 - 43.4
Seatpost
10 - 12
89 - 106
Seat
10 - 12
89 - 106
Wheels
60 - 65
44 - 48
Torque Specifications
