4
EASY WEIGH bAbY ScAlES
5
EASY WEIGH bAbY ScAlES
SPECIFICATIONS
Memorisation of weight (M+)
Recall of memorised weight (MRC)
Weight freeze function (HOLD)
Large 78.5 x 37 mm LCD screen
On/Off switch (ON/OFF)
Automatic tare (TARE)
FEATURES
• Maximum weight: 15kg
• Increments: 10g (0-6kgs), 15g (7-15kgs)
• Measurement freeze function
• Weight memory function
• Indicates the difference between the
current and previous weights
• Automatic tare
• Power supply: 2 x AAA batteries (included)
• Low battery indicator
1
2
3
4
5
6
operAtion
1. putting in the battery
The appliance uses 2 x AAA batteries
(included). Insert the 2 x AAA batteries into
the battery compartment underneath the
baby scale. Respect the pola/-.
2. Use
Press the ON/OFF button. All the elements
on the screen are displayed for a few
seconds, followed by “0.00kg” and the
symbol “ “. When the symbol “ ”
disappears and only “0.00kg” appears on
the screen, place the baby in the cradle.
If your baby keeps still, his/her weight will
automatically stabilise after a few seconds
and then appear on the screen. If your
baby is moving, the symbol “ ” appears
on the left-hand side of the screen and a
non-stabilised weight scrolls on the screen.
Press the HOLD button to freeze the
baby’s weight. The “ ” symbol is
replaced by “HOLD”. The screen displays
the baby’s stabilised weight. When it is not
being used, the baby scale automatically
switches off after approximately 20 seconds.
a- Automatic tare function
The automatic tare function allows you to
weigh your baby comfortably lying on a
blanket without including the weight of
the blanket.
• Switch on the scale by pressing the
ON/OFF button.
• Put the blanket on the cradle.
• Press the TARE button, the screen
displays “---” then “0.00kg”.
• Place your baby comfortably on
the blanket.
Only the baby’s weight is displayed.
(When you remove both the baby and the
blanket, a negative weight may appear.
This is the corresponding weight of the
blanket in negative.)
b- Weight memorisation
When the weight of the baby appears
on the screen, you can store it in the
memory by pressing the “ ” button, and
it will continue to be displayed for a few
seconds. The “M+” symbol appears.
1
2
3
4
5
6
DetAiLeD pArtS GUiDe