10
11
EN
EN
SLIT LAMP TSL-7000Hdigital and TSL-7000Zdigital by TOMEY
SLIT LAMP TSL-7000Hdigital and TSL-7000Zdigital by TOMEY
5. CONTROLS
5.1 BACKGROUND ILLUMINATION ADJUSTMENT
5.2 EXPOSURE AND REVIEW BUTTONS
Pressing these buttons provides adjustment of the camera exposure.
5.3 CAPTURE BUTTON
Press once to ‘freeze frame’.
Use image review buttons to select best frame.
Press again to capture selected frame.
5.4 KEYBOARD SHORTCUTS
Press
Ctrl + Alt + Shift
with function keys
F6
Right eye
F9
Review freeze frame images forwards
F7
Left eye
F10 Shorter exposure time
F8
Freeze frame / Trigger
F10 Review freeze frame images
backwards
F9
Longer exposure time
Increase exposure time (milliseconds)
Review freeze frame images forwards
Decrease exposure time (milliseconds)
Review freeze frame images backwards
6. WARRANTY
The Tomey H-Series and Z-Series Slit Lamps are guaranteed for two years against faulty
workmanship materials or factory assembly. Warranty is on a Return To Base (RTB) basis at the
cost of the customer and may be void if the Slit Lamp has not been regularly serviced.
The manufacturer’s warranty and terms and conditions are detailed on the Tomey website.
The mirror, main illumination lamp and general ‘wear and tear’ are excluded from our standard
warranty.
The manufacturer declines any and all responsibility and warranty
coverage should the instrument be tampered with in any manner or
should routine maintenance be omitted or performed in manners not in
accordance with these manufacturer’s instructions.
There are no user serviceable parts in this instrument. Any servicing
or repairs should only be carried out by Tomey GmbH . or by suitably
trained and authorised distributors. Service manuals will be available to
authorised Tomey service centres and Tomey trained service personnel.
7. SPECIFICATIONS AND ELECTRICAL RATINGS
The Tomey Slit Lamp is a medical electrical instrument. The instrument requires special care
concerning electromagnetic compatibility (EMC). This Section describes its suitability in terms
of electromagnetic compatibility of this instrument. When installing or using this instrument,
please read carefully and observe what is described here.
Portable or mobile-type radio frequency communication units may have an adverse effect on
this instrument, resulting in malfunctioning.
7.1 ELECTROMAGNETIC EMISSIONS
Guidance and manufacturer’s declaration – electromagnetic emissions
The Digital Slit Lamp is intended for use in the electromagnetic environment specifi ed
below. The customer or user of the Digital Slit Lamp should ensure that it is used in such an
environment.
Emissions test
Compliance Electromagnetic environment – guidance
RF emissions CISPR 11
Group 1
The Digital Slit Lamp uses RF energy only for its internal
function. Therefore, its RF emissions are very low and are
not likely to cause any interference in nearby electronic
equipment.
RF emissions CISPR 11
Class B
The Digital Slit Lamp is suitable for use in a professional
healthcare facility environment. The Digital Slit Lamp is
not intended for use in home environment.
Harmonic emissions
IEC 61000-3-2
Class B
TSL-H SERIES SLIT LAMP
TSL-Z SERIES SLIT LAMP
