Tomey TCP-2000P, Operation Manual

Page: 30 / 113

Operation Manual
30
4.11.1. Programming Mode
To define your own program follow step 1 to 4:
1. Choose program you would like to edit using Arrow Up or Arrow Down.
2. Press Right Arrow, to enter Programming Mode.
Now you can start building your program sequence. Select test you want to add to
current program (picture, tests or masks). To confirm your selection and add step
to the program press ‘
F1 ’ button. Device will signal with message ‘ Item added to
program, Press any key to continue’ each properly added step of the program.
3. Press ‘ F2 ’ after program step has been stored to end programming process
and store selected test into the memory of the chart panel.
Device will signal end of programming sequence with message ’Programming
finished’.
You can enter Menu at any moment and change settings, e.g. children tests, chart
type, etc.
4.11.2. Executing user’s program
To execute user-defined program stored in device memory simply press ‘ F1 ’, ‘ F2 ’
or ‘
F3
’ button.
Chart Panel will automatically display first test chart of the program you selected.
In the bottom corners of the screen
◄ ► arrows are displayed, to inform that user
program mode is executed. Green arrow indicates there is next/previous chart
available, white – there are no more charts in given direction in the program.
Navigation:
1. Use right arrow button on the RC to move to the next chart of the
program, left arrow to return to the previous chart
.
2. To switch to other program or to restart selected program press
respectively ‘
F1 ’, ‘ F2 ’ or ‘ F3 ’ button.
3. To exit program and return to normal operating mode press any other
button than ‘
F1
’, ‘
F2
’, ‘
F3
’, right/left Arrow.