ONE PASS SCRUBBING
TRACTION DRIVE MACHINES - (SEE BELOW)
1. Turn on machine power switch
"A"
, make sure
the speed control knob
"B"
is at it's lowest setting.
2. Lower squeegee by rotating the squeege lift lever
"C"
all the way to the right (vac motor will turn on
automatically.)
3. Lower scrub head to the floor, use the
top half (+) of the brush switch
"D"
.
4. Turn the solution flow adjustment knob
"E"
to regulate the amount of solution flow.
5. Begin scrubbing by depressing one of the
green control buttons
"D"
on the handle bar.
Adjust the speed control knob
"B"
to the desired
setting.
6. Once the machine begins to move, check
the down pressure on the LCD screen
"F"
.
To adjust the down pressure, push toggle switch
"G"
forward to increase pressure backward to
decrease pressure. Start scrubbing at the #1 or
#2 marks. Do not use the #4 or #5 marks without
management's approval.
7. To operate the machine in reverse, simply pull
the forward/reverse switch
"H"
back towards the
handle bar. The reverse speed is set to approx-
imately 50% of the forward speed.
8. To stop the machine, let go of the green
control button
"D"
.
PAGE 15
SCRUB ONLY
TRACTION DRIVE MACHINES - (SEE BELOW)
1. Turn on machine power switch
"A"
make sure
the speed control knob "
B"
is at it's lowest setting
.
2. Lower scrub head to the floor, use the
top half of the brush switch
"D"
.
4. Turn the solution flow adjustment knob
"E"
to regulate the amount of solution flow.
5. Begin scrubbing by depressing one of the
green control buttons
"D"
on the handle bar.
Adjust the speed control knob
"B"
to the desired
setting.
6. Once the machine begins to move, check
the down pressure on the LCD screen
"F"
.
To adjust the down pressure, push toggle switch
"G"
forward to increase pressure backward to
decrease pressure. Start scrubbing at the #1 or
#2 marks. Do not use the #4 or #5 marks without
management's approval.
7. To operate the machine in reverse, simply pull
the forward/reverse switch
"H"
back towards the
handle bar. The reverse speed is set to approx-
imately 50% of the forward speed.
8. To stop the machine, let go of the green
control button
"D"
.
VACUUM ONLY
TRACTION DRIVE MACHINES - (SEE BELOW)
1. Turn on machine power switch
"A"
, make sure
the speed control knob
"B"
is at it's lowest setting.
2. Lower squeegee by rotating the squeege lift
lever
"C"
all the way to the right (vac motor will
turn on automatically.)
3. Begin vacuuming by depressing one of the
green control buttons
"D"
on the handle bar.
F
E
A
D
B
C
D
D
G
H
