Tomcat 250 series, Operator And Parts Manual

Page: 20 / 107

1. THE
"HIGH RECOVERY"
LIGHT (RED) WILL
ILLUMINATE
(A)
WHEN THE RECOVERY TANK IS
FULL. STOP IMMEDIATELY AND DRAIN RECOVERY
TANK.
(SEE PICTURE TO THE LEFT)
2. IF RED LIGHT IS IGNORED THE VAC WILL OVERHEAT .
(SEE PICTURE TO THE LEFT)
3. IF VAC IS PULLING EXCESSIVE CURRENT, CIRCUIT
BREAKER
(25 AMP) MAY BLOW TO PREVENT
DAMAGE. IF THIS OCCURS CONTACT YOUR
SERVICE AGENT.
(SEE PICTURE TO THE LEFT)
4. VAC SWITCH (B) IS SET TO ENGAGE AT 65" LIFT.
5. IF FOAM OR WATER GETS PAST THE RECOVERY
TANK'S VAC SCREEN/BALL SYSTEM THE
"UNLOADER VALVE" (E) WILL DRAIN IT FROM
THE VAC BOX.
(SEE PICTURE TO THE LEFT AND PICTURE BELOW)
VAC SYSTEM
B
E
A
A
6. "
UNLOADER VALVE" (E)
IS LOCATED ON THE
BOTTOM OF THE VACUUM BOX IN FRONT OF
THE VAC MOTOR.
(SEE PICTURE TO THE LEFT)
PAGE 18