Tomcat 250 series, Operator And Parts Manual

Page: 24 / 107

DRAINING SOLUTION TANK
TO DRAIN LEFT OVER CLEANING SOLUTION FROM THE SOLUTION
TANK, PERFORM THE FOLLOWING STEPS.
1. ROTATE THE (BLUE) SOLUTION TANK DRAIN VALVE LOCATED
IN THE FRONT LEFT SIDE OF THE FRAME
(SEE PICTURE BELOW)
B
2. UNSCREW CAP AND BEGIN DRAINING.
(SEE PICTURE BELOW)
3. ONCE TANK IS EMPTY, PUT THE CAP BACK ON AND PLACE
HOSE BACK ON HOOK.
DRAINING RECOVERY TANK
ALWAYS EMPTY RECOVERY TANK WHEN REFILLING THE
SOLUTION TANK. TO DRAIN THE RECOVERY TANK, PERFORM THE
FOLLWING STEPS.
1. REMOVE DRAIN HOSE AND UNSCREW CAP. OPEN THE TOP
"RECOVERY ACCESS LID" AND FLUSH OUT WITH FRESH WATER
TO KEEP TANK CLEAN.
(SEE PICTURE BELOW)
3. OPEN TH TOP "RECOVERY TANK LID" AND FLUSH OUT WITH
FRESH WATER TO KEEP TANK CLEAN.
RINSE THE RECOVERY TANK AFTER EVERY USE. THIS WILL
PREVENT HEAVY BUILD UP ON THE BOTTOM OF THE TANK,
FOUL ODERS, AND CLOGGING OF THE DRAIN HOSE.
2. TO OPEN THE VALVE HANDLE SHOULD BE IN LINE.
(SEE PICTURE BELOW)
3. TO CLOSE VALVE HANDLE SHOULD BE PERPENDICULAR.
(SEE PICTURE BELOW)
PAGE 22