Tomberlin E-MERGE, Operator'S Manual

Page: 9 / 44

Inspect battery terminals, cables and batteries before each use.
Always wear a full face shield, rubber gloves and rubber apron when
working with or in close proximity to batteries.
charger and place the run/tow switch to the tow position before
Turn the ignition switch to the off position, remove the key, unplug the
inspecting or performing any type of service on the vehicle.
Connections should be tight and free of corrosion.
Utilize insulated tools only when working with electrical connections.
The tightness of the battery terminal nut should be between 95-105 inch
pounds of torque. Do not over tighten. Loose and/or over tightened
connections can cause battery failure, explosion and or fire.
Do Not Overfill the Batteries and keep batteries clean and free of
moisture.
If any high heat condition or burning smell is noticed immediately park
the vehicle in a safe location, place the ignition in the off position, move
yourself and passengers away quickly to a safe distance from the
vehicle and contact your dealer for assistance and repair. If fire or smoke
Any referance to Battery Care or maintenance is intended as general safety guidelines.
Always consult and follow the recommendations of your battery manufacturer if contrary
to those expressed herein. Never exceed your skill level by performing services you are
not trained to accomplish. When in doubt, Stop and call a professional.