Tomberlin E-MERGE, Operator'S Manual

Page: 18 / 44

• Do not exceed the recommend number of occupants for the
vehicle;
o Maximum occupants on the single bench E-Merge: Two (E2)
o Maximum occupants on the two bench E-Merge: Four (E4)
A
CAUTION
• Inspect the safety belt webbing and hardware periodically. Check
for cuts, frays or loose parts. Replace components if excessive
wear or damage is noticed.
• Keep safety belts clean and dry. To clean, use mild soap and
warm water. Do not use bleach, dye or abrasive cleaners as this
will weaken the belt webbing material.
• Do not insert any foreign objects into the retractor mechanism.
Periodically check for smooth operation and replace if the
mechanism is not operating properly.
PRE-OPERATING INSPECTION
Each vehicle has been thoroughly inspected by both the manufacturer
and dealer. Before the initial operation, it is important that the user
inspect the vehicle using the following guidelines:
• General all parts are securely fastened to the vehicle, no parts are
missing, and all screws or nuts are properly tightened.
• Review all warning decals and placement on the vehicle.
• Safety Belts visually inspect and test for safe operation.
• Tires check for proper inflation as identified on the vehicle
Certification Label.
• Batteries check electrolyte level in all cells of each battery. If any
cell is low, add distilled water as described in the Battery Care
section of this manual. All wires should be free of corrosion.
Batteries should be fully charged before first use of vehicle.
• Brakes - check hydraulic fluid level. If it is low, immediately call a
qualified mechanic for service.
• Charger cord, plug, and receptacle inspect for cracks, loose
connections, or frays.
Page 16 E-Merge Operator's Manual