Page 23
200909
Use the aid of a dead blow hammer if the
holes in the canopy pillar do not align with
the base
Secure the canopy pillar to its base as
shown with the bolt being inserted from the
outside of the unit going toward the center
of the vehicle
Tighten the canopy pillar hardware using a
13mm socket and a 17mm box wrench
Secure the canopy pillar support to its base
as shown with the bolt being inserted from
the front of the unit going to the rear
Tighten the pillar support hardware using a
14mm socket and a 13mm box wrench
The canopy pillar and pillar support are
secured together in the same manner with
the bolt going through from the underside
of the canopy pillar support upwards
Units being shipped in the open will need to
have the seat belt strap secured with a Ty-‐
wrap prior to shipment
Summary of Contents for E-Merge E2
