Safety Guidelines
Eye and ear protection must be worn at all times while the Floor Stripper is in use. During normal
operation, sound pressure levels less than 85 dBA. Use only ANSI approved safety glasses to help
prevent eye injury. Everyday eyeglasses have only impact resistant lenses; they are NOT safety
glasses.
Operator must wear appropriate clothing and footwear. Do not wear loose clothing or jewelry that
can get tangled in moving parts. Footwear should provide sure footing and protection.
Materials being removed can be toxic or hazardous. A breathing respirator is required to help protect the
operator from inhaling the airborne material when operating this machine.
This is an electric tool. Do not use in a damp or wet location. Death or serious injury will result from
electric shock.
While the Floor Stripper uses standard household current, use only grounded extension cords
appropriately sized for the current draw requirements of this unit (17amps/115 volts). Check the data
plate on the
machine to be sure. Be sure to account for voltage drop based on the length of the cord. (Use 12/3 AWG
up to 50 ft and 10/3 AWG up to 100ft. If working over 100ft. from the power source consult with an elec-
trician.) Insufficient power will cause the motor to overheat and burn out. Never use frayed, damaged,
taped, or underrated extension cords. Death or serious injury can result from electrical shock. Do not let
the cord contact hot or sharp surfaces that can cause damage.
If the motor stops for any reason, turn the power switch to OFF and unplug power cord at the machine before
investigating the problem. The power may unexpectedly be restored while you are away from the machine. For
the same reason, unplug the power cord at the machine before performing any maintenance. Never leave the
machine running unattended. Serious injury and/or damage to the equipment could result.
•
Remove the blade before transporting or hoisting the Floor Stripper.
The Floor Striper’s blade is very
sharp and can cause serious bodily injury, damage to any surface it contacts, and or damage to the machine
and blade.
•
The Floor Stripper is designed to be controlled by a single operator.
•
Never operate the Floor Stripper while under the influence of drugs, alcohol or when taking medications that impair
the senses or reactions, or when excessively tired or under stress.
•
Be sure decals on the machine can be clearly read and understood. Replace worn or missing decals immediately,
Safety warnings and guidelines do not by themselves eliminate danger.
They are not given as substitutes for proper accident prevention procedures and good judgement.
Read and understand all operating instructions
before operating this equipment.
Death or serious injury can result if this machine is used improperly.
