background image

3

Register Your Equipment

Thank you for purchasing TOMAHAWK equipment! Your product is covered by the 

TOMAHAWK Warranty policy, but in order to activate your warranty, we need you to register 

your product. In addition to activating your equipment warranty, product registration will 

grant you access to important product updates, streamlined customer service and more. 

INCLUDED WITH YOUR REGISTRATION

     

☑     Equipment Warranty Activation

     

☑     Product Updates

     

☑     Streamlined Customer Service

     

☑     Excusive Discounts and Sales

STEPS TO REGISTER YOUR EQUIPMENT

     1.

 

Visit www.tomahawk-power.com

     2.

 

Choose “Product Registration” at the bottom of the page

     3.

 

Enter your equipment’s serial number to get started

     4.

 

Provide all required information

     5.

 

Submit Registration

Equipment Resources

Tomahawk Customer Service doesn’t stop at checkout. We understand to keep a job-site 

running smoothly - the proper equipment, spare parts, instruction manuals, and more are 

needed at the drop of a hat. Visit 

www.tomahawk-power.com

 to gain access to the incredible 

resources below.

How To Video Library

 

More of a visual person? Visit our Video Library for equipment

assembly instructions, troubleshooting tips, and more!

Found on each product listing or the Service Videos Page

Manual and Assembly Guide Library

 

Visit our Manual Library if you are looking for a lost 

operations manual or a particular spare part?  

Found on each product listing or the Tomahawk Manuals Page

Service Requests

In need of a quick fix or a service center referral? Submit a

Service Request and a Tomahawk Technician will respond

shortly to get you the help you need.

Choose “Service Request” at the bottom of www.tomahawk-power.com

Summary of Contents for JXPT24K













































Reviews:

Related manuals for JXPT24K