Tomahawk JXPT24K, Operation Manual

Page: 11 / 44

8
Feed the cable throughthe pivot nut and
through the swivel stop, then fasten the screw.
10
Fasten the positive (red) and negative
(black) engine leads to the battery.
12
Pull the housing back and slide the end of
the cable into the engine’s throttle terminal.*
7
To attach the throttle cable, remove the air
filter and the cover.
9
Bring the kill switch wire to the front of the
engine and connect it the the shut off switch.
11
Fit the top of the cable housing into the
slot and tighten the locknuts.
* Move the throttle control back and forth to make sure the cable is engaged.
11
4. QUICK START GUIDE CONTINUED
5. CONTROLS AND COMPONENTS
1 Standard Handle
Includes a "starwheel" for manually adjusting blade pitch.
5.2 Foldable Quick Pitch Handle
Employs a lever handle to quickly adjust blade pitch. Handle folds for storage.
5.3 Centrifugal Kill Switch
In the event the operator loses control of the trowel, this switch will shut-down the engine.
5.4 Throttle Control Lever
The throttle controls the speed of the engine. Move the hand lever towards the operator to
increase engine speed (high), away from the operator to decrease engine speed (low).