15
LED Status Lights
When the ADT is first plugged in to a powered eye gaze device the ADT will
quickly flash 5 times and then both LED’s will turn off.
When the ADT is plugged in via USB to an eye gaze device running Ability
Drive
TM
a single LED will be lit.
When the ADT is plugged into an eye gaze device running Ability Drive
TM
and a
drive command is being sent from Ability Drive
TM
the second LED on the ADT
will light up while the drive command is being sent afer a short delay.
If the ADT is responding properly and the powerchair is still not driving, check
the power chair’s programming and make sure that it is in the profile for Ability
Drive
TM
.
Summary of Contents for Ability Drive ADT
Page 1: ...Ability DriveTM Manual ...
Page 2: ......
Page 18: ...18 Evaluation Notes ...
Page 32: ......