Tolis Group ArGest TGL1800, User Manual

Page: 15 / 39

2 - Unpacking the Library
Remove the packaging, accessories, and Library from the box one layer at a
time. Place the Library on a level work surface. Carefully remove the foam
padding and then the bag from the Library. Save the packaging materials to
move or ship the Library in the future.
Identify Product Components
Confirm that you received the following
product components as per your order:
1.
SAS, FC, or parallel SCSI cable(s)
matching your LTO drive(s) type
2.
Power cord
3.
Power cord extension cable (select
units only)
4.
Two rack rails (ships in separate
box)
5.
Two packets of rack hardware
6.
Product documentation is located
online at tolisgroup.com
Removing and Storing the Shipping Lock
The shipping lock protects the robotic transport mechanism from moving
during shipment and must be removed and stored before powering on the
Library.
Locate the adhesive tape holding the storage lock at the top of the Library.
Remove the adhesive tape, then remove the storage lock and store it as shown.
IMPORTANT:
The shipping lock must be removed for the robotics to work properly. A robot move error is displayed if
the shipping lock is not removed. Always insert the shipping lock when moving or shipping the library to
protect the internal robotics during movement. Failure to use the shipping lock when moving the library
may damage the library and void the warranty.
15