Tolis Group ArGest TGL1800, User Manual, Page: 26 / 39

6 - Using the Remote Management Interface (RMI)
With the RMI, you can monitor, configure, and operate most Library functions from a web browser. The
only tasks you cannot do from the RMI are:
- Opening the mailslots.
- Initiating the Wellness test.
- Saving and restoring configuration files, saving support tickets, and downloading firmware via a
USB flash drive.
To enable the RMI, follow the instructions in this document to:
- Connect the Library to your local area network with an Ethernet cable.
- Configure the network settings of the Library.
- If you intend to use the administrative functions of the RMI, set the Administrator password using
the OCP.
NOTE : The Library is shipped without an administrator password. You must set the
administrator password with the OCP before you can use the RMI administrator
functions. Once the administrator password is set, you can access the RMI by providing
the administrator password on the login screen.
Logging In
Using the OCP, find the Library IP address from the Info > Network screen. Open any HTML web
browser and enter the Library IP address. Select the account type. For the administrator account, you
must also enter the administrator password. Click Sign In.
Once signed in, click Help in the upper right-hand corner for more information about the fields and
information in the RMI.
NOTE: The Library is shipped without an administrator password. You must set the
administrator password with the OCP before you can use the RMI’s administrator
functions. Once the administrator password is set, you can access the RMI by providing
the administrator password on the login screen.
Status Icons
The green Status OK icon indicates that the Library is fully operational and that no user interaction
is required.
The blue exclamation point Status Warning icon indicates that user attention is necessary, but that
the device can still perform most operations.
The red X Status Error icon indicates that user intervention is required and that the device is not
capable of performing some operations.
26