Toledo Transducers MoniTTor N269, Installation And Operation Manual

Page: 18 / 53

11
GOOD PART RELAY TIME GOOD 0 (value) ENTER
REJECT RELAY TIME REJECT 0 (value) ENTER
DECREASE RELAY TIME DE 0 (value) ENTER
INCREASE RELAY TIME IN 0 (value) ENTER
PRESET COUNTERS To display press: To change press:
SHUTDOWN RELAY TIME REJECT . (0-9) ENTER
DECREASE RELAY TIME DE . (0-9) ENTER
INCREASE RELAY TIME IN . (0-9) ENTER
ZONE COUNTERS To display press:
REJECT HI ZONE COUNT REJECT HI
REJECT LO ZONE COUNT REJECT LO
DECREASE GOOD ZONE COUNT GOOD DE
INCREASE GOOD ZONE COUNT GOOD IN
OK ZONE COUNT GOOD GOOD
DECREASE ZONE COUNT COUNT DE DE
RELAY COUNTERS To display press:
GOOD PART COUNT GOOD
REJECT COUNT REJECT
DECREASE COUNT DE
INCREASE COUNT IN
INCREASE ZONE COUNT COUNT IN IN
CHANGE FROM 0 TO 2 CHANS & BACK: LOW LOW LOW . 0 or 2 ENTER
RESETTING ALARMS: RESET RESET RESET
CLEARING ANY DATA: CLEAR - clears display to zero
CLEAR MEMORY: press and hold CLEAR - then press RESET RESET RESET
DIAGNOSTICS: each time DIAG is pressed new diagnostic info is shown when #=1, battery
voltage is displayed
I. GENERAL DESCRIPTION - Refer to figure 7