manualshive.com logo in svg

Tokyo Shinyu Silwatch, User Manual, Page: 14 / 14

Share
Download
Tokyo Shinyu Silwatch User Manual Download Page 14

23

24

Specifications

 This product is a wave communication system. Operation failure may occur according to a surrounding radio wave condition.
 The specifications may be changed without notice for improvement.

The certificate of the technical standard conformance of the specified low power radio 
station has been obtained based on radio law for the transmitter and the repeater. The 
license application for a radio station is unnecessary. Accordingly, observe the 
following strictly.

●

 The label attached to the product is the marking for the certificate of the technical 

standard conformance. Do not remove it by any means.

●

 The products with the labels cannot be disassembled or modified for use.

●

 Use of illegally modified products shall be subject to punishment.

(The transmitting range will be extended 300 meters for every 
additional repeater.)

*1. The battery life for a receiver is based on a normal use (5 to 6 times 

a day with clock display turned on).

*2. Two AAA batteries for a transmitter or a repeater are sold eparately.

Frequency

Transmitting output

Transmission range (m)

Power source

Current rating

External dimensions (mm)

Weight (g)

Operating temperature

Water resistance

Battery life

Accessory

Specification

Wristwatch-type

receiver

426 MHz range

170 (estimate)

−

Lithium ion

battery 3.7V

150mA MAX

43 × 38 × 16

Approx. 45

-10 °C to +50 °C

Daily life

water resistance

Lithium ion

battery 3.7V

(built-in)

4 days (*1)

Charger

Approx. 60

-10 °C to +50 °C

100-240VAC, 

50/60Hz - 5VDC

adapter

−

−

−

−

−

70mA MAX

84 × 46 × 31

Transmitter

426 MHz range

100-240VAC, 50/60Hz 

- 5VDC adapter or

2 AAA batteries

50mA MAX

65 × 62 × 23 (excluding antenna and protrusions)

Approx. 80

-10 °C to +50 °C

100-240VAC, 

50/60Hz - 5VDC

adapter

Specified low-power

radio 1 mW

−

−

2.5 months (*2)

(when the power is always on)

1 year (*2)

(when the power is always on)

Repeater

426 MHz range

Specified low-power

radio 1 mW

300 (estimate)

Approx. 80

-10 °C to +50 °C

100-240VAC, 

50/60Hz - 9VDC

adapter

−

15mA MAX

100-240VAC, 

50/60Hz - 5VDC

adapter

100-240VAC, 50/60Hz 

- 5VDC adapter or

2 AAA batteries

Summary of Contents for Silwatch















Reviews:

No comments